Press consists of two parts consisting of hydraulic and pressing machines, hydraulic press Henan Which is good, it's common faults and troubleshooting methods are as follows. Board material reason is: ① oil temperature steaming and roasting inappropriate material temperature is too low, pie throwing water content is too high; ② cake blanks uneven thickness; when installed ③ cake, stacked cake is not correct; ④ press when too much too fast. Corresponding Remedy are: ① take appropriate direction steaming and roasting, Henan hydraulic press, improving the material temperature to above 85 ℃, Henan hydraulic press manufacturers, the moisture content of less than 7%; note ② uniformly thick cake confectionery time ; ③ installed when to fold bad cake pie positive; ④ due to lower press speeds. Sesame oil machine use: new press installation 4-8 hours after grinding pressing, method is to use the oil has been drained cake material from the hopper fed slowly, back pressed repeatedly, Henan wholesale hydraulic press to make juice bore polishing, remember not to start grinding virgin material directly into the hopper and fed to the clutch appropriate, to prevent the pressing screw shaft stuck. Feeding excessive, abnormal noise or pressing screw shaft stuck in the virgin bore should immediately stop, eliminate obstruction, or re-assembled and then start grinding pressing, non-forcible trailer. Henan hydraulic press _ Goodwin machinery specializing in the production of automatic hydraulic press press _ provided by Nanyang City, Qi Feng Machinery Co., Ltd. Henan hydraulic press _ Goodwin machinery specializing in the production of automatic hydraulic press press _ Nanyang City, Qi Feng Machinery Co., Ltd. (www.qifengjixie.com) (www.nyqfjx.com) this year introduced a new upgrade, The above pictures are for reference only, please call Tel picture on this page or to obtain the latest information, contact: Mr. Wang.