Common screw press machine impede the normal production of oil is low or releasing another way: run slag excess oil extraction process, between cage bars a little run residue is abnormal signs. If you run slag excess, about the following reasons; ① individual cage bars bent or gap is too large. In this case, remove the cage bars, sesame oil machine, with gauze or Whetstone alpha- cage bars three convex side polished, straight cage bars reload, Nanyang sesame oil machine, some thin metal pad if needed, link the gap in within the context of 0.05-0.08 mm. ② oil plastic is not good, the cake difficult to make machine bore pressure increase. At this time, the oil should be mixed with water appropriately, and the mill, progressive machine in order to improve fuel temperature ductility. ③ too thin cake. Book request should clarify properly increase the thickness of the cake. Sesame oil machine use: new press installation 4-8 hours after grinding pressing, method is to use the oil has been drained cake material fed from the hopper slowly, back pressed repeatedly to make virgin bore polishing, remember began to grind Do not squeeze the material directly into the hopper and fed to the clutch appropriate, to prevent the pressing screw shaft stuck. Feeding excessive, abnormal noise or pressing screw shaft stuck in the virgin bore should immediately stop, eliminate obstruction, or re-assembled and then start grinding pressing, non-forcible trailer. Henan sesame oil machine manufacturers | Goodwin machinery (Online) | sesame oil machine provided by Nanyang City, Qi Feng Machinery Co., Ltd. Nanyang City, Qi Feng Machinery Co., Ltd. (www.qifengjixie.com) (www.nyqfjx.com) is Nanyang, Henan, edible oil processing machinery leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Goodwin machinery leadership with the staff warmly welcome all inquiries negotiations to create Goodwin machinery better future.