It should be carried out after installation hour peanut oil press mill pressing: is to use already-pressed rapeseed cake over pie feed oil. Soybean, peanut, cotton cake or cotton shell, rice hulls can be fed from the hopper slowly, back pressed repeatedly. So pressing screw polishing, a cake shaped, smooth, remember not to start grinding virgin material directly into the hopper and fed to the clutch appropriate press manufacturer to avoid pressing screw shaft stuck; Feeding excessive, abnormal sound or pressing screw shaft stuck inside the pressing chamber, should be immediately shut down, eliminate obstruction press, the cake mouth emitting smoke. Squeeze the hot cake to spread out in time, in order to avoid spontaneous combustion. When the continuous working longer screw press Nanyang new offer, when the machine temperature is too high, should take measures to cool the fan blowing and other continuous work, the heater can be stopped before working press boot, you must first conduct a comprehensive inspection, each not loose fasteners, handle rotation flexibility, hand rotating pulley, each operating components should be normal, no abnormal sound, and then filling in the gear box machine oil. Loosen the lock nut, turn the adjustment screw, so pressing tight against the cone snail cake mouth of the cone, then the adjustment screw clockwise circle automatic screw press, then tighten the lock nut, ready Power hydraulic press control meters and instruments transferred to press the desired temperature according to the total heating oil may be twisted open the machine to heat up, then the temperature controller on the bright green light, red light goes off. When the machine temperature rise to the set temperature, and the red light, green light is off, the temperature of the machine is automatically controlled and maintained at a set temperature degrees. Forward button pressed host host starts running, the screw shaft should turn counter-clockwise direction. When the screw press oil extraction troubleshooting of the excessive residue: (1) oil is too dry, very fine cracks discharged from the juice increased, this time to re-adjust the fuel moisture. (2) The fuel is too wet, do not form pressure, diesel can not be separated, if this time the drain slit is too large gap of the extrusion from the oil residue it should adjust the fuel moisture and juice bar assembly tightness. Press manufacturers, press, Goodwin mechanical press oil yield by Nanyang City, Qi Feng Machinery Co., Ltd. Nanyang City, Qi Feng Machinery Co., Ltd. (www.qifengjixie.com) (www.nyqfjx.com) strong, credible, Nanyang in Henan edible oil processing machinery industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Goodwin machinery into the brilliant and you work for a better future!